Search Tips»
Grouping and Logical OR: notebook (ibm or sony) Negation: laserjet printer not monochrome Negation: printer -laser -monochrome \tGrouping and Logical OR: printer (epson or canon) (inkjet or laser) not multifunction Group Operator: printer -(dot matrix)
Standalone - Tower - 1 x Source Drive(s) Supported - 9 x Destination Drive(s) Supported - mini-SATA Drive Interface
Copy up to nine (9) mSATA/mini mSATA SSD or 2.5" SATA HDD/SSD with drive thickness up to 9.5 mm
Supported source media: mSATA/mini SATA SSD, 2.5" SSD, 2.5" hard drive and 3.5" hard drive
Supported target media: mSATA/mini SATA SSD. 2.5" SSD and 2.5" hard drive
Comes with ten (10) units of mSATA flash drive kits (AD25MSD-E) to convert mSATA/mini mSATA SSD to 2.5" SSD
An easy source switch at the back of the unit for selecting 3.5" drive or 2.5" drive source slot
Additional support for M2 (NGFF), CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional 2.5" flash drive kit - AD25M2SSD-E, AD25CFASTD-N, AD25CFD-N, AA25SEMBK, AD18M25S
High performance with minimum degradation from one to nine targets
Support any file system
Maximum storage capacity >3TB
Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
The Addonics family of Combo mSATA HDD duplicator is designed for making multiple copies of mSATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" mSATA flash drive kit that turns a mSATA SSD into a 2.5" SATA SSD. You can mix and match the mSATA SSD and the hard drive into the duplicator, thus making it a handy tool for transferring the content between the mSATA card and 2.5" hard drive. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.
About this model
This 1:9 mSATA /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time. Comes bundled with ten (10) mSATA flash drive kits to convert mSATA SSD into a 2.5" SSD, the source and target drive can be of either mSATA SSD, 2.5" SATA SSD or 3.5" SATA hard drive. In addition, there is a source slot for using 3.5" hard drive as a master drive, a great solution for transferring content on 3.5" SATA hard drive to mSATA SSD or 2.5" SATA drive. By adding other optional 2.5" flash drive adapters, the supported media can be expanded to include M2 (NGFF) card, CFast card, CF card, slim SATA SSD and 1.8" HDD/SSD. Designed with snap-In drive bay, drives are easily added or removed without any special tool, just like an ordinary cassette tape.