Search Tips»
Grouping and Logical OR: notebook (ibm or sony) Negation: laserjet printer not monochrome Negation: printer -laser -monochrome \tGrouping and Logical OR: printer (epson or canon) (inkjet or laser) not multifunction Group Operator: printer -(dot matrix)
Standalone - 1 x Source Drive(s) Supported - 1 x Destination Drive(s) Supported - Serial ATA, IDE Drive Interface
Copy any 2.5" or 3.5" hard drive / SSD to any 2.5" or 3.5" hard drive or SSD with AES 256-bit encryption and vice versa*
Great for cloning hard drives, making back up hard drives, system upgrade, and data distribution
Top bay supports SATA, IDE or Addonics AES 256-bit encrypted drive using the included Diamond SATA, IDE or Diamond Cipher II drive enclosure
Bottom bay is a Snap-In drive bay that supports 3.5" SATA HDD or 2.5" SATA HDD/SSD via an optional 2.5" - 3.5" drive adapter (AE25SN35SA). Drive is directly loaded into the drive bay without any special tool.
Top and bottom bay can be set to either as Source or Target bay depending on the Source/Target switch setting on the back of the unit
Any eSATA drive can be attached to the Source or Target port on the back of the unit for use as a Source or Target drive
Support any type of file format
Typical copying speed1 ~ 250 MB/sec (actual speed depends on the performance of the drive)
No drive capacity limitation
Operate as a stand-alone appliance. No computer or software needed
The Jasper II 1:1 SATA/IDE HDD/SSD Duplicator PRO S is one of the most versatile drive duplicators in the market. This duplicator can be used to copy practically any SATA or IDE HDD/SSD in 3.5" or 2.5" form factor. The included Diamond Cipher II enclosures (drive carrier) also enable copying data directly to or from a hard drive with AES 256-bit hardware encryption. Using Addonics optional 2.5" flash drive kits, this duplicator can copy a variety of popular flash media such as M2 SATA SSD, mSATA SSD, CFast card, CF card, Micro SATA HDD/SSD or slim SATA SSD.
Similar to other members of the Addonics HDD Duplicator family, this PRO S model is also simple to use and operate. Just load your master hard drive to the source drive bay and another hard drive of capacity equal or larger than the source drive to the target drive bay, turn the key lock on each drive bay to the lock position and push the start button to start the copying process.
