Search Tips»
Grouping and Logical OR: notebook (ibm or sony) Negation: laserjet printer not monochrome Negation: printer -laser -monochrome \tGrouping and Logical OR: printer (epson or canon) (inkjet or laser) not multifunction Group Operator: printer -(dot matrix)
Standalone - Tower - 1 x Source Drive(s) Supported - 5 x Destination Drive(s) Supported - Serial ATA Drive Interface
Copy up to five (5) M2 SATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
The supported media can be mixed in the target slots - great for transferring content between M2 SATA SSD and 2.5" SSD/HDD
Comes with six (6) units of M2 flash drive kits (AD25M2SSD-E) to convert M2 SATA SSD to 2.5" SSD
Additional support for mSATA/mini mSATA, CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional model of 2.5" flash drive kit - AD25MSD-E, AD25CFASTD-N, AD25CFD-N, AA25SEMBK, AD18M25S
High performance with minimum degradation in copying from one to five targets
Compact size and light weight for easy transportation
Support any file system
Maximum drive size >4TB
Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
The Addonics family of M2/SSD/HDD duplicator is designed for making multiple copies of M2 SATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" M2 flash drive adapter that turns a M2 SATA SSD into a 2.5" SATA SSD. You can mix and match the M2 SATA SSD, 2.5" SSD or hard drive into the duplicator, thus making it a handy tool for transferring the content between the M2 SATA SSD and 2.5" SATA HDD/SSD. There is no computer needed or complex software to operate the Addonics duplicator. Just load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.
About This Model
This 1:5 Combo M2 SATA SSD and 2.5" SATA HDD/SSD duplicator allows you to copy from one source media onto as many as five (5) target media at one time. Using the included 2.5" M2 flash drive adapters, the M2 SATA SSD can be used just like a regular 2.5" SATA hard drive. The source and target drive can be of either M2 SATA SSD, 2.5" SATA SSD or 2.5" SATA hard drive. Drives are loaded and unloaded from the duplicator just like cassette tape without any drive tray or special tool. The high performance duplicator controller in this unit also ensures optimal performance in copying from one to five targets. By adding other optional 2.5" flash drive adapters, the supported media can be expanded to include mSATA/mini mSATA SSD, CFast SSD, CF card, slim SATA SSD and 1.8" HDD/SSD.